Author Topic: linka Moulds  (Read 3146 times)

0 Members and 1 Guest are viewing this topic.


  • Hero Member
  • *****
  • Posts: 1,032
  • Karma: +1/-0
    • View Profile
linka Moulds
« on: June 14, 2012, 10:28:04 AM »
I just won an ebay auction for 28.65

13 Moulds include:

Stonework Moulds
S1 - Standard stone sections.
S3 - Arches, wall sections, half panels, buttress, gables, copings.
S4 - Arch window, doorway, gables, joint section, small window.
S5 - Castellations, coping and coving, chimneys, corners and extensions.
S6 - Ironclad double gateway, double windows, panel door.

Roofing Moulds
R1 - Standard slate sections, half sections, chimneys, ends and corners.
R3 - Standard large slate sections, ends and shallow sections.

Brickwork Moulds
B1 - Standard brickwork.
B2 - Panel and glass doors, modern, single & double windows.
B4 - Skylights, circular and arched windows, door & buttresses.
B6 - Gables, extensions, half sections, coping & coving.

Timber Moulds
T2 - Lapboard windows, doors extensions, coping.
T3 - Log cabin sections, door, window, gables, edging.

I haven't done the casting in a long time but this was a pretty good deal.  the brickwork and stonework will be used to make 40k terrain.  not sure what I'm going to do with the Timber Moulds.
« Last Edit: June 14, 2012, 10:41:38 AM by Highland_Piper »


  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: linka Moulds
« Reply #1 on: February 21, 2018, 02:27:33 AM »
I studied after reading this. I do get new knowledge, which is really useful.